The easiest boat flushing system to use the easy flow system allows you to quickly flush your boat’s circulation system without the worry of enough water flow flushing through the pump and its housing or having to contend with monitoring and adjusting the flushing muffs. Simple quick connect to the valve for flushing and quick connect the sealing cap for securely sealing shut the valve inlet US 9,010,355, B1
The most thorough boat flushing system Some top-selling flushing systems neglect properly flushing the impeller, it’s housing, and the outdrive during the flushing process. The Easy flow system flushes the entire cooling system and the out-drive with the maximum supply of city water. The Easy-Flow quick connect Cap quickly and securely seals the valve shut when done. This is the only system with a quick connect inlet that makes connecting and disconnecting to your boats cooling system or water holding tank simple. US 9,010,354 B2 US 9,933,098 B2
The Easy- Flow valve allows you to disconnect from flushing, quick connect to a water nozzle, and spray down your boat without having to turn off the water. It can flush your boat either in or out of the water, winterize your boat engine, and be used as an emergency bilge pump.
valve: Electro-polished stainless-steel valve that mates with a seal proof quick connect cap. The valve inlet is a male end quick connect fitting that connects to a female quick connect hose coupler or cap. The back of the 2-1/2” diameter flange is 1” male NPT threads spanning 1” for locking valve into place with a nut, continuing with ½” barbed end spanning 1” for connecting a 5/8” hose.
Cap: 1/8” diameter Female quick connect cap 1” long with an internal opening 6/8”.
valve 9.60 oz
Cap 2,20 oz